This is the material we use to create our Adorn Countertops and table tops. This product is formulated for exterior and interior purpose and is only found here!
Adorn Countertop 3-Gallon Kit will cover 64 square feet of surface for both the Design Coat (Color Coat and Clear Coat, about 3oz of Adorn Countertop Epoxy per Square Foot per coat).
If you are doing a Wood Slab you will need to seal with a thin layers of Adorn Countertop Epoxy before the flood coating. We use 1oz per Square Foot to SEAL wood slabs (Do not create puddles with a seal coat). We like to apply 2-3 seal coats on raw wood slabs before we apply our Flood Coat , humidity should not exceed 12% in wood slabs . MDF needs no seal coats. We like to sand and polish our slabs and countertops to bring them to the most high end look and feel possible. This is optional and many customers are happy with their results with out the extra work, or using our satin top coat.
Each 3-Gallon kit of Adorn Countertop Epoxy will cover 64 sqft, depending on the amount you use for your designer coat, (Dirty Pour, we recommending 4oz per sqft for your color coat, clear coat stays with 3oz per square feet) .
Adorn Countertop Epoxy is formulated for exterior and interior use, it is highly UV-resistant. Do not use the epoxy above 30°C (86°F) surface temperature, and not in direct sunlight, it may will cure to fast and air bubbles will be captured in the epoxy. If you like to pour exterior, plan for it early morning or late afternoon.
Do not pour this material over 1/8″ per coat.